Audio engineers, producers, and musicians looking for a high-quality monitoring solution will be impressed with the??JBL 306P MkII - Powered 6.5" Two-Way Studio Monitor,?a bi-amplified reference monitor with next-generation drivers, offering high detail, precise imaging, a wide sweet spot, and a remarkable dynamic range to enhance the mix capabilities of any modern workspace. The magnetically-shielded 306P MkII features dual 56W Class-D amplifiers, which power the 6.5" low frequency woofer and woven-composite 1" neodymium tweeter. The combined output of the woofer and tweeter offer a frequency response of 47 Hz to 20 kHz with a peak SPL of 110 dB.





The monitor features JBL's Image Control Waveguide technology for accurate audio reproduction and JBL's Slip Stream port design for improved bass response. The 306P MkII is equipped with a boundary EQ for controlling the low frequency response when placed near a wall, as well as a 3-position HF trim switch. To ensure flexible connectivity, JBL included a balanced XLR input and a balanced 1/4" TRS input, both of which feature dented level control. Other features include a selectable input sensitivity switch that ensures compatibility with a range of signal sources. The JBL 306P MkII ships with a power cord.Looking for a high-quality subwoofer for your production studio? Check out the JBL LSR310S, a 200W Class-D subwoofer that has been optimized for use in JBL's 3 Series of speakers and is well suited for use in music recording, mix, postproduction, and 5.1 surround applications. The subwoofer features a 10" speaker and JBL's Slip Stream Port to provide a peak output of 113 dB.





A selectable Extended Low Frequency (XLF) effect allows you to augment the low-frequency response found in many dance clubs, allowing you use the LSR310S to provide a sonic picture of how your tracks will sound at the club. It also has a selectable input sensitivity and 3 crossover settings including 80 Hz, XLF (120 Hz), and external, allowing the use of an external crossover.The Kopul Studio Elite 4000 Series XLR M to XLR F Microphone Cable (10') is a studio-quality cable for connecting mics to mixers, preamps, audio interfaces, and recorders or to be used in any other application where XLR connectivity is required. The cable is engineered to be both quiet and durable, and is well suited for critical recording and broadcast situations.





Studio Elite 4000 Series cables are made from 24 AWG OFC copper wire that's wrapped with PE insulation and a conductive PVC inner shield. A cotton-yarn inner layer helps reduce electrostatic and microphonic noise. A 98% braided outer shield makes the cable resistant to EMI and RFI noise. The Neutrik XX silver connectors provide a high level of connectivity, and all the solder connections are shrink-wrapped for protection.The 10 foot PM-TRS 1/4" TRS Male to 1/4" TRS Male Interconnect Cable from Pearstone features Rean connectors with nickel-plated contacts on both ends, 24-gauge oxygen-free copper conductors, and spiral shielding to protect against EMI and RFI noise. Additionally, twin conductive PVC shields reduce electrostatic noise and provide a clean signal path while retaining good flexibility for those occasions that demand it.





The connector's molded strain relief over metal shells provides excellent durability and allows for increased protection between the OFC conductors and the connectors. The cable is ideal for both live and studio applications, including connecting powered speakers to studio monitor controllers, or connecting synthesizers and outboard gear to mixers, or wherever balanced connections are indicated.The small IP-S Isolation Pad from Auray is a monitor speaker isolation pad made from high-density acoustic foam. It is designed to decouple your monitor speakers from its resting surface by absorbing the monitor's vibrations. This stops reverberation through the desk or speaker stands, therefore preventing unwanted resonance. Removing these unwelcome vibrations results in greater depth of field, tighter low end and transient response, and a higher level of detail across the frequency spectrum.The ISO-SUB Subwoofer Isolation Stabilizer from Auray is for improving the sound and resolution of a subwoofer. It is used to reduce vibrations and unwanted resonance that can make a subwoofer sound muddy, and is ideal for home theater, studio, and stereo-system applications.





A sturdy, fabric-covered wooden base with EVA (ethylene-vinyl acetate) padding isolates and stabilizes the speaker, and a high-density acoustic foam decouples the speaker from the floor so low frequencies sound clearer and more focused. The ISO-SUB's design preserves the accuracy and clarity of your subwoofer and decreases the transmission of vibrations to adjacent rooms and other spaces.