NOSTORY





The Fluke FLK-VT04-ELEC-KIT electrical kit includes a Fluke VT04 visual infrared thermometer, a Model 117 digital multimeter, and a Model 376 clamp meter. The VT04 visual infrared thermometer has a built-in digital camera, hi-low temperature alarms, time-lapse image capture and a measurement range of 14 to 482 degrees F (-10 to +250 degrees C). The thermal heat map has five levels of overlay that enable the operator to locate precisely the area of concern. The built-in digital camera takes time-lapse images and saves up to 10,000 images per gigabyte on a removable micro SD data card (4 GB card included). Images can be exported for long-term records retention or inclusion in reports using the included SmartView analysis and reporting software.

The Fluke Model 117 dual-impedance digital multimeter measures true RMS- AC amps and volts, DC amps and volts, continuity, ohms, capacitance, low impedance (LoZ) capacitance, and hertz. The meter has automatic AC/DC volt selection, true RMS AC measurements for accurate measurements on non-linear loads, and minimum, maximum, and average data for recording signal fluctuations. The meter also performs a diode test and measures resistance, continuity, frequency, and capacitance. Low impedance (LoZ) measurements deliver a low impedance input to the circuit, eliminating ghost voltages and improving accuracy. The white backlit LED is suitable for use in low lighting. Non-contact voltage detection speeds measurements. The meter includes test leads, holster, one 9V battery, and instructions.

The Fluke 376 true RMS AC/DC clamp meter measures 1,000 amp AC and DC current with the fixed jaw or 2,500 amp AC current with the flexible current probe. True RMS AC voltage and current measurements provide accurate readings on non-linear signals. The iFlex flexible current probe increases the measurement range to 2,500 amp AC and measures awkward-size conductors or in hard-to-reach areas. An integrated low-pass filter and signal processing provide stable readings in noisy electrical environments. Minimum, maximum, and average readings capture signal fluctuations. Inrush measurement technology filters out noise and captures the motor starting current as seen by the circuit protection. The meter has a CAT IV 600V, CAT III 1,000V safety rating. The meter includes an 18-inch iFlex probe, test leads, a soft carrying case, and instructions. VT04 IR Thermometer SpecificationsDetector typeUncooled pyroelectric ceramicThermal sensitivity (NETD)< or = 250mKField of view28 x 28 degreesImage PalettesHot Metal, Ironbow, Rainbow, Rainbow High Contrast, Grayscale (white hot) and Grayscale (black hot)Temperature range14 to 482 degrees F (-10 to +250 degrees C)Image file format.is2 format saved to SD card; user can create professional reports or export images using supplied software (BMP, DIB, GIF, SPE, FIF, SPEG, JPG, PNG, TIF and TIFF)Safety compliancesCFR47: 2009 Class A. Part 15 subpart B; CE: EN 61326:2006; IEC/EN 61010-1:2010 Pollution Degree 2, 2 m dropComputer interfaceMicro USB connectorPowerRechargeable Li-ion battery, 3.6V, 2250 mAh, 8.1 Wh; 8 hour lifeDimensions (H x W x D)8.3 x 3 x 2.2 inches/21 x 7.5 x 5.5 cmWeight10.5 oz./300 g
117 Multitester SpecificationsMaximum voltage between any terminal and earth ground600VDC millivolts range and resolution600.mV range with 0.1mV resolutionDC volts range and resolution6.000V range with 0.001V resolution; 60.00V range with 0.01V resolution; 600.00V range with 0.1V resolutionAC millivolts (true RMS) range and resolution600.0mV resolution with 0.1mV resolutionAC volts (true RMS) range and resolution6.000V range with 0.001V resolution; 60.00V range with 0.01V resolution; 600.0V range with 0.1V resolutionContinuity range and resolution600 ohms range with 1 ohm resolutionOhms rangeup to 600.0 ohmsDiode test2.000VCapacitance1000 nanofarads to 1000 microfaradsLoZ capacitance1 nanofarads to 500 microfaradsCertificationsUL, CSA, TUV, N10140 , VDE, IP42Safety compliancesANSI/ISA 82.02.01 (61010-1) 2004; CAN/CSA C22.2 No 61010-1-04; UL 6101B (2003); EMC EN61326-1; and IEC/EN 61010-1 2nd Edition for measurement Category III, 600 V, Pollution Degree 2
376 Clamp Meter SpecificationsAC/DC current measurement (fixed jaw)1,000 ampAC/DC current measurement (iFlex current probe)2,500 amp ACAC/DC voltage1,000VFrequency (jaw and iFlex)Up to 500HzResistance with continuity detection60 kilohms
PROD번호 : 690495231